Monthly Payment Disclaimer
CloseThe values presented on this site are for estimation purposes only. Your actual payment may vary based on several factors such as down payment, credit history, final price, available promotional programs and incentives. Applicable tag, title, destination charges, taxes and other fees and incentives are not included in this estimate.
Dealer Spike is not responsible for any payment data presented on this site. Please verify all monthly payment data with the dealership’s sales representative.
- New
- Geneseo
- Lawn Mower
- Riding
2024 John Deere X500 Series X590 54-in. deck
Features may include:
V-twin engine has electronic fuel injection (EFI) and constant-speed governor for quick starts and superior performance
- The tractor is powered by a John Deere iTorque™ power system, a combination of engine features and an exclusive hood design providing superior lugging ability, even cooling, and durability. Key engine features include:
- 25.5 hp (19 kW) at 3500 rpm
- Large 726-cc displacement
- V-twin air-cooled design
- Excellent power and performance
- Smooth, quiet power
- Easy starts
- Quality features include:
- Cast-iron cylinder liners
- Overhead valves
- Full-pressure lubrication
- Replaceable oil filter
- Dual-stage air cleaner
- Solenoid-shift starter for easy starts, even in cold weather
- Electronic fuel injection (EFI)
- EFI meters the correct amount of fuel directly into each engine cylinder for all operating conditions.
- It simplifies engine starts and warm-up by eliminating the need for the operator to use a choke.
- Fuel usage is reduced up to 10 percent compared to a carbureted engine.
- Constant-speed governor
- Constant-speed governor works in conjunction with EFI to electronically adjust the supply of fuel air mixture, to increase torque as needed to maintain engine operating speed under load.
- Ground speed and mower blade-tip speed remain constant, even in heavy-grass conditions, to improve productivity and cut quality.
- Mechanical governors cannot respond fast enough to maintain a constant engine speed.
- Some torque rise remains to warn the operator before the engine stalls.
- X590's constant-speed governor is a first in the mowing industry.
ELECTRONIC FUEL INJECTION AND CONSTANT-SPEED GOVERNOR
- No choke control is needed for the EFI engine because a servo motor controls the intake air butterfly valve and the air stream. For cold starts the actuator will close the valve, making starting the engine easier - no choke lever is needed. Starts are quick and easy - even for inexperienced operators.
- The advanced engine features provide the following advantages:
- Constant-speed governor improves performance.
- Mowing time is reduced as the constant-speed governor keeps the engine operating at optimum speed, responding instantaneously as the mower transitions from light to heavy mowing.
- Cut quality is improved, especially in difficult mowing conditions, because the constant-speed governor keeps the mower blades turning at full speed, delivering optimal cut quality and dispersion of clippings. While snow blowing, maintaining the fan speed enables consistent snow placement.
- EFI increases uptime.
- Fast, reliable starts are routine just like with a modern automobile. EFI automatically meters fuel, including the extra fuel needed to start a cold engine. Flooding by unnecessary choking of a warm engine is eliminated. No carburetor adjustments are needed at altitude.
- No choke-related problems since the choke is eliminated, thus ensuring operator confidence and quick starts, even in cold ambient temperatures (snow blower use). The mechanical throttle cable is replaced by an electric linkage that is not susceptible to wear or freezing.
- Cost of ownership is reduced.
- EFI precisely meters fuel to each engine cylinder. Fuel usage can be expected to be about 10 percent less than with a similar carbureted tractor.
- Geneseo
- New
- 2024
- John Deere
- X500 Select Series X590 54-in. Deck
- Lawn Mower
- Riding
- https://creditapp.financial.deere.com/form?dealer=068582&ref=RME&type=RSME&country=us
- 25.5 hp (19 kW)
- Model: FS730 EFI
- 44.3 cu in.(726 cc )
- Electronic fuel injection (EFI), overhead valve, full-pressure lube, oil filter
- V-twin, cast-iron liners
- Constant-speed electronic throttle control
- method: Air
- Dry, replaceable with foam precleaner
- Solenoid shift
- Gasoline | tank location: Rear
- delivery: Open-loop electronic fuel injection (EFI)
- Gauge on dash
- speed control: No choke required
- Power, hydraulic | Tilt wheel: five position
- Mower: Electric power take-off (PTO) clutch, in-line belt | Mower attachability: Dual belts
- Internal wet disc
- 24x12-12 HDAP
- 16x6.5-8 turf
- Mower: Four
- 12 V / 340 CCA
- Flywheel alternator, regulated, 24 amp
- Welded heavy-duty
- mounting: Yes, heavy duty
- Headlights: Two standard, incandescent, 27 W | Taillights or reflector: Reflectors
- Backup protection: Reverse Implement Option (RIO)
- Fuel fill opening On left fender: 3 in. (7.6 cm) | Steering wheel: 14 in. (35.6 cm) | Fore-aft adjustment - While seated, ball bearing slide rail, 15-position: 6.6 in. (17 cm) | Mower deck material: 0.135 in. (10 gauge 3.4 mm) | Mower wheels rotate: 90 degrees for easy mower removal
- Accel Deep™ mower deck: 54 in. (137 cm)
- 22 in. (55.9 cm) | Uncut circle: 24 in. (61 cm)
- back: 21 in. (53 cm)
- Mower cut: 1-4 in. (13 positions, 2.5-10.2 cm) | Cut increments: 0.25 in. (0.64 cm) | 52.7 in. (1338 mm)
- 77.4 in. (1966 mm)
- 51.2 in. (1300 mm)
- with mower: 68.4 in. (1737 mm) | with mower (deflector raised for storage): 58.3 in. (1481 mm) | without mower: 40.7 in. (1034 mm)
- tank: 4.4 U.S. gal. (16.7 L)
- Maximum: 800 lb (363 kg)
- bracket- front and rear - each holds up to four Quik-Tatch: 42 lb (19 kg) | 796 lb (361 kg)
- Transaxle type: K72 hydrostatic integrated with transaxle | Transaxle control: Twin Touch™ pedals | Cruise control: Yes, button on dash | Primer/paint: E-coat/powder | Floor mats: Sure-grip rubber | Storage: Yes, covered toolbox | Fender handles/grips: Handles | Mower deck: Side discharge | Mower attachability: Roll under tractor | Front draft arms: Attached with spring pins at two points | Rear draft arms: Quick-pull pins
- change: No-tools oil drain with replaceable filter | cooler: Fins and fan on transaxle | filter: Yes, replaceable
- Hydraulic | system type: Foot pedal with adjustable spring assist
- Front axle: Cast iron front axle, front wheel ball bearings | Spindle bushings: Metal, replaceable | Hood: Fully enclosed, molded-in color material reduces sound, will not rust or dent | Mower deck: Forged steel deck shell
- Fender: Stamped steel
- Cut-and-sewn high-back | suspension: Six-position parallel arm
- Mower Wheel: Seven-position, spring-loaded pin | Mower level: Exact Adjust ports and deck-leveling gauge
- 4 year/500 hour bumper-to-bumper
Recommendations
Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.